diff --git a/routing/iproute2/rt_tables b/routing/iproute2/rt_tables new file mode 100644 index 0000000..e7a6a38 --- /dev/null +++ b/routing/iproute2/rt_tables @@ -0,0 +1,13 @@ +# +# reserved values +# +255 local +254 main +253 default +0 unspec +# +# local +# +##1 inr.ruhep +2 tbc +3 tpark diff --git a/routing/network/interfaces b/routing/network/interfaces new file mode 100644 index 0000000..2e1007a --- /dev/null +++ b/routing/network/interfaces @@ -0,0 +1,99 @@ +# This file describes the network interfaces available on your system +# and how to activate them. For more information, see interfaces(5). + +source /etc/network/interfaces.d/* + +# The loopback network interface +auto lo +iface lo inet loopback + +# video personel +auto eth0 +iface eth0 inet static + address 10.23.0.1 + netmask 255.255.255.0 + +#real config +auto eth1.999 +iface eth1.999 inet static + address 172.31.42.100 + netmask 255.255.255.0 +iface eth1.999 inet6 static + address 2001:67c:21bc:7fff:f0f:fcf0::100 + netmask 120 + dad-attempts 0 + +auto eth1 +iface eth1 inet static + address 192.168.192.168 + netmask 255.255.255.255 + +# management +auto eth1.20 +iface eth1.20 inet static + address 10.20.0.1 + netmask 255.255.255.0 + up ip a add 185.117.82.237/32 dev eth1.20 + +# wired +auto eth1.21 +iface eth1.21 inet static + address 10.21.0.1 + netmask 255.255.252.0 + +iface eth1.21 inet6 static + address 2001:67c:21bc:30::1 + netmask 64 + dad-attempts 0 + +# wireless +auto eth1.22 +iface eth1.22 inet static + address 10.22.0.1 + netmask 255.255.252.0 + +iface eth1.22 inet6 static + address 2001:67c:21bc:31::1 + netmask 64 + dad-attempts 0 + +# overflow (TV) +auto eth1.24 +iface eth1.24 inet static + address 10.24.0.1 + netmask 255.255.255.0 + +# phones +auto eth1.25 +iface eth1.25 inet static + address 10.25.0.1 + netmask 255.255.255.0 + +# security +auto eth1.26 +iface eth1.26 inet static + address 10.2.2.1 + netmask 255.255.255.0 + + +auto eth1.6 +iface eth1.6 inet static + address 94.26.100.155 + netmask 255.255.255.224 +# gateway 94.26.100.129 + up ip r add 94.26.100.128/27 dev eth1.6 table tbc + up ip r add default via 94.26.100.129 table tbc + +# tmp initlab bgp link +auto eth1.1024 +iface eth1.1024 inet static + address 185.117.82.24 + netmask 255.255.255.240 + +# techpark +auto eth1.2464 +iface eth1.2464 inet static + address 194.141.112.139 + netmask 255.255.255.192 + post-up ip r add 194.141.112.128/26 dev eth1.2464 table tpark + post-up ip r add default via 194.141.112.129 table tpark diff --git a/routing/openvpn/.gitignore b/routing/openvpn/.gitignore new file mode 100644 index 0000000..c996e50 --- /dev/null +++ b/routing/openvpn/.gitignore @@ -0,0 +1 @@ +*.key diff --git a/routing/openvpn/marla.conf b/routing/openvpn/marla.conf new file mode 100644 index 0000000..6264495 --- /dev/null +++ b/routing/openvpn/marla.conf @@ -0,0 +1,22 @@ +dev tun0 + +tun-ipv6 +remote 185.117.82.66 +local 194.141.112.139 + +proto udp + +tun-mtu 1500 +ifconfig 172.31.43.3 172.31.43.2 +ifconfig-ipv6 2001:67c:21bc:7fff:f0f:fcf1::2/120 2001:67c:21bc:7fff:f0f:fcf1::1 + +secret /etc/openvpn/eric.key + +port 4299 + +; user nobody +; group nobody + +ping 15 +verb 1 +script-security 2 diff --git a/routing/quagga/bgpd.conf b/routing/quagga/bgpd.conf new file mode 100644 index 0000000..cd49fae --- /dev/null +++ b/routing/quagga/bgpd.conf @@ -0,0 +1,55 @@ +! +! Zebra configuration saved from vty +! 2017/11/04 13:22:45 +! +hostname eric-bgpd +password password +log stdout +! +router bgp 65500 + bgp router-id 192.168.192.168 + network 185.117.82.237/32 + neighbor 172.31.42.1 remote-as 200533 + neighbor 172.31.42.1 description marla-pri + neighbor 172.31.42.1 soft-reconfiguration inbound + neighbor 172.31.42.1 prefix-list openfest out + neighbor 172.31.42.1 route-map ipacct-in in + neighbor 172.31.43.2 remote-as 200533 + neighbor 172.31.43.2 description marla-bckp + neighbor 172.31.43.2 soft-reconfiguration inbound + neighbor 172.31.43.2 prefix-list openfest out + neighbor 185.117.82.20 remote-as 65535 + neighbor 185.117.82.20 description spitfire + neighbor 185.117.82.20 soft-reconfiguration inbound + neighbor 185.117.82.20 prefix-list openfest out + neighbor 2001:67c:21bc:7fff:f0f:fcf0:0:1 remote-as 200533 + neighbor 2001:67c:21bc:7fff:f0f:fcf0:0:1 description marla6-pri + no neighbor 2001:67c:21bc:7fff:f0f:fcf0:0:1 activate + neighbor 2001:67c:21bc:7fff:f0f:fcf1:0:1 remote-as 200533 + neighbor 2001:67c:21bc:7fff:f0f:fcf1:0:1 description marla6-bckp + no neighbor 2001:67c:21bc:7fff:f0f:fcf1:0:1 activate +! + address-family ipv6 + network 2001:67c:21bc:30::/60 + neighbor 2001:67c:21bc:7fff:f0f:fcf0:0:1 activate + neighbor 2001:67c:21bc:7fff:f0f:fcf0:0:1 soft-reconfiguration inbound + neighbor 2001:67c:21bc:7fff:f0f:fcf0:0:1 route-map ipacct-in6 in + neighbor 2001:67c:21bc:7fff:f0f:fcf1:0:1 activate + neighbor 2001:67c:21bc:7fff:f0f:fcf1:0:1 soft-reconfiguration inbound + neighbor 2001:67c:21bc:7fff:f0f:fcf1:0:1 prefix-list openfest6 out + exit-address-family +! +ip prefix-list openfest seq 5 permit 185.117.82.237/32 +ip prefix-list openfest seq 10 deny any +! +ipv6 prefix-list openfest6 seq 5 permit 2001:67c:21bc:30::/60 +ipv6 prefix-list openfest6 seq 10 deny any +! +route-map ipacct-in permit 10 + set local-preference 150 +! +route-map ipacct-in6 permit 10 + set local-preference 150 +! +line vty +! diff --git a/routing/quagga/daemons b/routing/quagga/daemons new file mode 100644 index 0000000..cb7c232 --- /dev/null +++ b/routing/quagga/daemons @@ -0,0 +1,31 @@ +# This file tells the quagga package which daemons to start. +# +# Entries are in the format: =(yes|no|priority) +# 0, "no" = disabled +# 1, "yes" = highest priority +# 2 .. 10 = lower priorities +# Read /usr/share/doc/quagga/README.Debian for details. +# +# Sample configurations for these daemons can be found in +# /usr/share/doc/quagga/examples/. +# +# ATTENTION: +# +# When activation a daemon at the first time, a config file, even if it is +# empty, has to be present *and* be owned by the user and group "quagga", else +# the daemon will not be started by /etc/init.d/quagga. The permissions should +# be u=rw,g=r,o=. +# When using "vtysh" such a config file is also needed. It should be owned by +# group "quaggavty" and set to ug=rw,o= though. Check /etc/pam.d/quagga, too. +# +# The watchquagga daemon is always started. Per default in monitoring-only but +# that can be changed via /etc/quagga/debian.conf. +# +zebra=yes +bgpd=yes +ospfd=no +ospf6d=no +ripd=no +ripngd=no +isisd=no +babeld=no diff --git a/routing/quagga/debian.conf b/routing/quagga/debian.conf new file mode 100644 index 0000000..dfbfb01 --- /dev/null +++ b/routing/quagga/debian.conf @@ -0,0 +1,24 @@ +# +# If this option is set the /etc/init.d/quagga script automatically loads +# the config via "vtysh -b" when the servers are started. +# Check /etc/pam.d/quagga if you intend to use "vtysh"! +# +vtysh_enable=yes +zebra_options=" --daemon -A 127.0.0.1" +bgpd_options=" --daemon -A 127.0.0.1" +ospfd_options=" --daemon -A 127.0.0.1" +ospf6d_options=" --daemon -A ::1" +ripd_options=" --daemon -A 127.0.0.1" +ripngd_options=" --daemon -A ::1" +isisd_options=" --daemon -A 127.0.0.1" +babeld_options=" --daemon -A 127.0.0.1" +# +# Please note that watchquagga_options is an array and not a string so that +# quotes can be used. +# +# The list of daemons to watch is automatically generated by the init script +# from daemons.conf and appended to the watchquagga_options. +# Example: +# watchquagga_options=("-Adz" "-r" '/sbin/service %s restart' -s '/sbin/service %s start' -k '/sbin/service %s stop') +watchquagga_enable=yes +watchquagga_options=(--daemon) diff --git a/routing/quagga/zebra.conf b/routing/quagga/zebra.conf new file mode 100644 index 0000000..0ec9631 --- /dev/null +++ b/routing/quagga/zebra.conf @@ -0,0 +1,50 @@ +! +! Zebra configuration saved from vty +! 2017/10/30 12:20:35 +! +hostname eric-zebra +password password +enable password password +! +interface eth0 + ipv6 nd suppress-ra +! +interface eth1 + ipv6 nd suppress-ra +! +interface eth1.2 + ipv6 nd suppress-ra +! +interface eth1.6 + ipv6 nd suppress-ra +! +interface eth1.10 + ipv6 nd suppress-ra +! +interface eth1.20 + ipv6 nd suppress-ra +! +interface eth1.21 + ipv6 nd suppress-ra +! +interface eth1.22 + ipv6 nd suppress-ra +! +interface eth1.24 + ipv6 nd suppress-ra +! +interface lo +! +interface tun0 + ipv6 nd suppress-ra +! +route-map RM_SET_SRC permit 10 + set src 185.117.82.237 +! +ip forwarding +ipv6 forwarding +! +ip protocol bgp route-map RM_SET_SRC +! +line vty +!