Readme and stuff

switch-configs/.gitignore

@@ -0,0 +1,2 @@
+secrets.conf
+*_compiled.cfg

switch-configs/README.md

@@ -0,0 +1,41 @@
+# Switch configurations for Openfest 2017
+
+## General port layout
+The following scheme is followed:
+
+ * Last copper port on the switch is UPLINK
+   * Uplink is trunk mode with access as a minimum to mgmt vlan (20) and purpose speciffic vlan (e.g. video (23))
+ * First copper port on the switch is PHONE (if such are required)
+   * mode is access
+   * VLAN 25
+ * Next up to 6 ports are for speciffic purposes (e.g. video related, general access, etc)
+   * Mode is access (unless specific equipment requires other. e.g. wifi is connected to this port)
+   * VLAN varies
+
+## Exception from the scheme
+There are 4 exceptions from the scheme:
+ * coresw - links all the rest so it is expected to be different
+   * Uplink is last 2 copper ports (47, 48)
+   * Ports 41 to 46 are reserved for internal services
+   * Downlinks to switches are on ports 1-6
+   * Presenters wired access is on port 7-9
+   * WIFI access is as follows:
+     * Ports 11 and 12 are trunked and go to PoE switch.
+     * Ports 12-18 are for dedicated WIFI AP's
+ * nocsw - needs easy access to all vlans on ports so all vlans are present there
+   * Multiple ports per vlan are present
+   * Port 1,2 - Phone access
+   * Port 3,4 - External vlan access
+   * Port 5,6 - mgmt vlan
+   * Port 7,8 - wired vlan
+   * Port 9,10 - wireless vlan
+   * Port 11-14 - video vlan - monitoring stations to be put
+   * Port 15,16 - overflow vlan
+   * Port 17-22 - shutdown (spare). NOC can use as wanted.
+   * Port 23,24 - UPLINK
+ * connectionsw - special switch to do media conversion between Single and Multi-mode optic
+   * Ports 9 and 10 are fiber
+   * Might not have IP (or any other config for that matter)
+   * All copper ports are shutdown
+ * fl2sw - switch located in floor 2 (-1) to facilitate own equipment usage
+   * last 2 ports are trunked uplink