2018/switch-configs

Switch configurations for Openfest 2017

General port layout

The following scheme is followed:

• Last copper port on the switch is UPLINK
  • Uplink is trunk mode with access as a minimum to mgmt vlan (20) and purpose speciffic vlan (e.g. video (23))
• First copper port on the switch is PHONE (if such are required)
  • mode is access
  • VLAN 25
• Next up to 6 ports are for speciffic purposes (e.g. video related, general access, etc)
  • Mode is access (unless specific equipment requires other. e.g. wifi is connected to this port)
  • VLAN varies

Exception from the scheme

There are 4 exceptions from the scheme:

• coresw - links all the rest so it is expected to be different
  • Uplink is last 2 copper ports (47, 48)
  • Ports 41 to 46 are reserved for internal services
  • Downlinks to switches are on ports 1-6
  • Presenters wired access is on port 7-8 (and trough vocsw-C)
  • WIFI access is as follows:
    • Ports 9 and 10 are trunked and go to PoE switch.
    • Ports 11-18 are for dedicated WIFI AP's
• nocsw - needs easy access to all vlans on ports so all vlans are present there
  • Multiple ports per vlan are present
  • Port 1,2 - Phone access
  • Port 3,4 - External vlan access
  • Port 5,6 - mgmt vlan
  • Port 7,8 - wired vlan
  • Port 9,10 - wireless vlan
  • Port 11-14 - video vlan - monitoring stations to be put
  • Port 15,16 - overflow vlan
  • Port 17-22 - shutdown (spare). NOC can use as wanted.
  • Port 23,24 - UPLINK
• connectionsw - special switch to do media conversion between Single and Multi-mode optic
  • Ports 9 and 10 are fiber
  • Might not have IP (or any other config for that matter)
  • All copper ports are shutdown
• fl2sw - switch located in floor 2 (-1) to facilitate own equipment usage
  • last 2 ports are trunked uplink