Merge pull request #5 from OpenFest/services-sync

Services sync

etc/aliases

@@ -0,0 +1,15 @@
+# /etc/aliases
+mailer-daemon: postmaster
+postmaster: root
+nobody: root
+hostmaster: root
+usenet: root
+news: root
+webmaster: root
+www: root
+ftp: root
+abuse: root
+noc: root
+security: root
+root: kalin
+nukemailz: /opt/syslog/arpwatch-mails.log

etc/arpwatch/README

@@ -0,0 +1,22 @@
+arpwatch does not support a configuration file, but the systemd unit files
+shipped with Debian allow to launch arpwatch with different configurations on
+each interface
+
+In order to do that, create a file called IFNAME.iface which contains variable
+assignments in sh syntax (comments are allowed). You can use the following
+variables to influence the invocation for that specific interface only:
+* ARGS: overwrite the ARGS from /etc/default/arpwatch
+* PCAP_FILTER: overwrite (or set) the pcap filter
+* IFACE_ARGS: additional options to be passed to arpwatch
+
+See `man 8 arpwatch` for available arguments. Note that the -f, -i and -u
+options are added by the init system and should not used. If you just want to
+apply the options specified in /etc/default/arpwatch for an interface you do
+not need to create a configuration file.
+
+
+For example, if you want to send mails about arpwatch events on eth0 to
+arpwatch+eth0@example.com, you can generate the configuration file using the
+following command:
+
+echo 'IFACE_ARGS="-m arpwatch+eth0@example.com"' > /etc/arpwatch/eth0.iface

etc/arpwatch/bond0.20.iface

@@ -0,0 +1 @@
+IFACE_ARGS="-m nukemailz"

etc/arpwatch/bond0.21.iface

@@ -0,0 +1 @@
+IFACE_ARGS="-m nukemailz"

etc/arpwatch/bond0.22.iface

@@ -0,0 +1 @@
+IFACE_ARGS="-m nukemailz"

etc/arpwatch/bond0.23.iface

@@ -0,0 +1 @@
+IFACE_ARGS="-m nukemailz"

etc/arpwatch/bond0.25.iface

@@ -0,0 +1 @@
+IFACE_ARGS="-m nukemailz"

etc/arpwatch/bond0.29.iface

@@ -0,0 +1 @@
+IFACE_ARGS="-m nukemailz"

etc/default/haveged

@@ -0,0 +1,4 @@
+# Configuration file for haveged
+
+# Options to pass to haveged:
+#DAEMON_ARGS=""

etc/fail2ban/fail2ban.conf

@@ -0,0 +1,86 @@
+# Fail2Ban main configuration file
+#
+# Comments: use '#' for comment lines and ';' (following a space) for inline comments
+#
+# Changes:  in most of the cases you should not modify this
+#           file, but provide customizations in fail2ban.local file, e.g.:
+#
+# [DEFAULT]
+# loglevel = DEBUG
+#
+
+[DEFAULT]
+
+# Option: loglevel
+# Notes.: Set the log level output.
+#         CRITICAL
+#         ERROR
+#         WARNING
+#         NOTICE
+#         INFO
+#         DEBUG
+# Values: [ LEVEL ]  Default: INFO
+#
+loglevel = INFO
+
+# Option: logtarget
+# Notes.: Set the log target. This could be a file, SYSLOG, STDERR or STDOUT.
+#         Only one log target can be specified.
+#         If you change logtarget from the default value and you are
+#         using logrotate -- also adjust or disable rotation in the
+#         corresponding configuration file
+#         (e.g. /etc/logrotate.d/fail2ban on Debian systems)
+# Values: [ STDOUT | STDERR | SYSLOG | SYSOUT | FILE ]  Default: STDERR
+#
+logtarget = /var/log/fail2ban.log
+
+# Option: syslogsocket
+# Notes: Set the syslog socket file. Only used when logtarget is SYSLOG
+#        auto uses platform.system() to determine predefined paths
+# Values: [ auto | FILE ]  Default: auto
+syslogsocket = auto
+
+# Option: socket
+# Notes.: Set the socket file. This is used to communicate with the daemon. Do
+#         not remove this file when Fail2ban runs. It will not be possible to
+#         communicate with the server afterwards.
+# Values: [ FILE ]  Default: /var/run/fail2ban/fail2ban.sock
+#
+socket = /var/run/fail2ban/fail2ban.sock
+
+# Option: pidfile
+# Notes.: Set the PID file. This is used to store the process ID of the
+#         fail2ban server.
+# Values: [ FILE ]  Default: /var/run/fail2ban/fail2ban.pid
+#
+pidfile = /var/run/fail2ban/fail2ban.pid
+
+# Options: dbfile
+# Notes.: Set the file for the fail2ban persistent data to be stored.
+#         A value of ":memory:" means database is only stored in memory 
+#         and data is lost when fail2ban is stopped.
+#         A value of "None" disables the database.
+# Values: [ None :memory: FILE ] Default: /var/lib/fail2ban/fail2ban.sqlite3
+dbfile = /var/lib/fail2ban/fail2ban.sqlite3
+
+# Options: dbpurgeage
+# Notes.: Sets age at which bans should be purged from the database
+# Values: [ SECONDS ] Default: 86400 (24hours)
+dbpurgeage = 1d
+
+# Options: dbmaxmatches
+# Notes.: Number of matches stored in database per ticket (resolvable via 
+#         tags <ipmatches>/<ipjailmatches> in actions)
+# Values: [ INT ] Default: 10
+dbmaxmatches = 10
+
+[Definition]
+
+
+[Thread]
+
+# Options: stacksize
+# Notes.: Specifies the stack size (in KiB) to be used for subsequently created threads,
+#         and must be 0 or a positive integer value of at least 32.
+# Values: [ SIZE ] Default: 0 (use platform or configured default)
+#stacksize = 0

etc/fail2ban/jail.conf

@@ -0,0 +1,964 @@
+#
+# WARNING: heavily refactored in 0.9.0 release.  Please review and
+#          customize settings for your setup.
+#
+# Changes:  in most of the cases you should not modify this
+#           file, but provide customizations in jail.local file,
+#           or separate .conf files under jail.d/ directory, e.g.:
+#
+# HOW TO ACTIVATE JAILS:
+#
+# YOU SHOULD NOT MODIFY THIS FILE.
+#
+# It will probably be overwritten or improved in a distribution update.
+#
+# Provide customizations in a jail.local file or a jail.d/customisation.local.
+# For example to change the default bantime for all jails and to enable the
+# ssh-iptables jail the following (uncommented) would appear in the .local file.
+# See man 5 jail.conf for details.
+#
+# [DEFAULT]
+# bantime = 1h
+#
+# [sshd]
+# enabled = true
+#
+# See jail.conf(5) man page for more information
+
+
+
+# Comments: use '#' for comment lines and ';' (following a space) for inline comments
+
+
+[INCLUDES]
+
+#before = paths-distro.conf
+before = paths-debian.conf
+
+# The DEFAULT allows a global definition of the options. They can be overridden
+# in each jail afterwards.
+
+[DEFAULT]
+
+#
+# MISCELLANEOUS OPTIONS
+#
+
+# "bantime.increment" allows to use database for searching of previously banned ip's to increase a 
+# default ban time using special formula, default it is banTime * 1, 2, 4, 8, 16, 32...
+#bantime.increment = true
+
+# "bantime.rndtime" is the max number of seconds using for mixing with random time 
+# to prevent "clever" botnets calculate exact time IP can be unbanned again:
+#bantime.rndtime = 
+
+# "bantime.maxtime" is the max number of seconds using the ban time can reach (doesn't grow further)
+#bantime.maxtime = 
+
+# "bantime.factor" is a coefficient to calculate exponent growing of the formula or common multiplier,
+# default value of factor is 1 and with default value of formula, the ban time 
+# grows by 1, 2, 4, 8, 16 ...
+#bantime.factor = 1
+
+# "bantime.formula" used by default to calculate next value of ban time, default value below,
+# the same ban time growing will be reached by multipliers 1, 2, 4, 8, 16, 32...
+#bantime.formula = ban.Time * (1<<(ban.Count if ban.Count<20 else 20)) * banFactor
+#
+# more aggressive example of formula has the same values only for factor "2.0 / 2.885385" :
+#bantime.formula = ban.Time * math.exp(float(ban.Count+1)*banFactor)/math.exp(1*banFactor)
+
+# "bantime.multipliers" used to calculate next value of ban time instead of formula, coresponding 
+# previously ban count and given "bantime.factor" (for multipliers default is 1);
+# following example grows ban time by 1, 2, 4, 8, 16 ... and if last ban count greater as multipliers count, 
+# always used last multiplier (64 in example), for factor '1' and original ban time 600 - 10.6 hours
+#bantime.multipliers = 1 2 4 8 16 32 64
+# following example can be used for small initial ban time (bantime=60) - it grows more aggressive at begin,
+# for bantime=60 the multipliers are minutes and equal: 1 min, 5 min, 30 min, 1 hour, 5 hour, 12 hour, 1 day, 2 day
+#bantime.multipliers = 1 5 30 60 300 720 1440 2880
+
+# "bantime.overalljails" (if true) specifies the search of IP in the database will be executed 
+# cross over all jails, if false (dafault), only current jail of the ban IP will be searched
+#bantime.overalljails = false
+
+# --------------------
+
+# "ignoreself" specifies whether the local resp. own IP addresses should be ignored
+# (default is true). Fail2ban will not ban a host which matches such addresses.
+#ignoreself = true
+
+# "ignoreip" can be a list of IP addresses, CIDR masks or DNS hosts. Fail2ban
+# will not ban a host which matches an address in this list. Several addresses
+# can be defined using space (and/or comma) separator.
+#ignoreip = 127.0.0.1/8 ::1
+
+# External command that will take an tagged arguments to ignore, e.g. <ip>,
+# and return true if the IP is to be ignored. False otherwise.
+#
+# ignorecommand = /path/to/command <ip>
+ignorecommand =
+
+# "bantime" is the number of seconds that a host is banned.
+bantime  = 10m
+
+# A host is banned if it has generated "maxretry" during the last "findtime"
+# seconds.
+findtime  = 10m
+
+# "maxretry" is the number of failures before a host get banned.
+maxretry = 5
+
+# "maxmatches" is the number of matches stored in ticket (resolvable via tag <matches> in actions).
+maxmatches = %(maxretry)s
+
+# "backend" specifies the backend used to get files modification.
+# Available options are "pyinotify", "gamin", "polling", "systemd" and "auto".
+# This option can be overridden in each jail as well.
+#
+# pyinotify: requires pyinotify (a file alteration monitor) to be installed.
+#              If pyinotify is not installed, Fail2ban will use auto.
+# gamin:     requires Gamin (a file alteration monitor) to be installed.
+#              If Gamin is not installed, Fail2ban will use auto.
+# polling:   uses a polling algorithm which does not require external libraries.
+# systemd:   uses systemd python library to access the systemd journal.
+#              Specifying "logpath" is not valid for this backend.
+#              See "journalmatch" in the jails associated filter config
+# auto:      will try to use the following backends, in order:
+#              pyinotify, gamin, polling.
+#
+# Note: if systemd backend is chosen as the default but you enable a jail
+#       for which logs are present only in its own log files, specify some other
+#       backend for that jail (e.g. polling) and provide empty value for
+#       journalmatch. See https://github.com/fail2ban/fail2ban/issues/959#issuecomment-74901200
+backend = auto
+
+# "usedns" specifies if jails should trust hostnames in logs,
+#   warn when DNS lookups are performed, or ignore all hostnames in logs
+#
+# yes:   if a hostname is encountered, a DNS lookup will be performed.
+# warn:  if a hostname is encountered, a DNS lookup will be performed,
+#        but it will be logged as a warning.
+# no:    if a hostname is encountered, will not be used for banning,
+#        but it will be logged as info.
+# raw:   use raw value (no hostname), allow use it for no-host filters/actions (example user)
+usedns = warn
+
+# "logencoding" specifies the encoding of the log files handled by the jail
+#   This is used to decode the lines from the log file.
+#   Typical examples:  "ascii", "utf-8"
+#
+#   auto:   will use the system locale setting
+logencoding = auto
+
+# "enabled" enables the jails.
+#  By default all jails are disabled, and it should stay this way.
+#  Enable only relevant to your setup jails in your .local or jail.d/*.conf
+#
+# true:  jail will be enabled and log files will get monitored for changes
+# false: jail is not enabled
+enabled = false
+
+
+# "mode" defines the mode of the filter (see corresponding filter implementation for more info).
+mode = normal
+
+# "filter" defines the filter to use by the jail.
+#  By default jails have names matching their filter name
+#
+filter = %(__name__)s[mode=%(mode)s]
+
+
+#
+# ACTIONS
+#
+
+# Some options used for actions
+
+# Destination email address used solely for the interpolations in
+# jail.{conf,local,d/*} configuration files.
+destemail = root@localhost
+
+# Sender email address used solely for some actions
+sender = root@<fq-hostname>
+
+# E-mail action. Since 0.8.1 Fail2Ban uses sendmail MTA for the
+# mailing. Change mta configuration parameter to mail if you want to
+# revert to conventional 'mail'.
+mta = sendmail
+
+# Default protocol
+protocol = tcp
+
+# Specify chain where jumps would need to be added in ban-actions expecting parameter chain
+chain = <known/chain>
+
+# Ports to be banned
+# Usually should be overridden in a particular jail
+port = 0:65535
+
+# Format of user-agent https://tools.ietf.org/html/rfc7231#section-5.5.3
+fail2ban_agent = Fail2Ban/%(fail2ban_version)s
+
+#
+# Action shortcuts. To be used to define action parameter
+
+# Default banning action (e.g. iptables, iptables-new,
+# iptables-multiport, shorewall, etc) It is used to define
+# action_* variables. Can be overridden globally or per
+# section within jail.local file
+banaction = iptables-multiport
+banaction_allports = iptables-allports
+
+# The simplest action to take: ban only
+action_ = %(banaction)s[port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
+
+# ban & send an e-mail with whois report to the destemail.
+action_mw = %(action_)s
+            %(mta)s-whois[sender="%(sender)s", dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s"]
+
+# ban & send an e-mail with whois report and relevant log lines
+# to the destemail.
+action_mwl = %(action_)s
+             %(mta)s-whois-lines[sender="%(sender)s", dest="%(destemail)s", logpath="%(logpath)s", chain="%(chain)s"]
+
+# See the IMPORTANT note in action.d/xarf-login-attack for when to use this action
+#
+# ban & send a xarf e-mail to abuse contact of IP address and include relevant log lines
+# to the destemail.
+action_xarf = %(action_)s
+             xarf-login-attack[service=%(__name__)s, sender="%(sender)s", logpath="%(logpath)s", port="%(port)s"]
+
+# ban IP on CloudFlare & send an e-mail with whois report and relevant log lines
+# to the destemail.
+action_cf_mwl = cloudflare[cfuser="%(cfemail)s", cftoken="%(cfapikey)s"]
+                %(mta)s-whois-lines[sender="%(sender)s", dest="%(destemail)s", logpath="%(logpath)s", chain="%(chain)s"]
+
+# Report block via blocklist.de fail2ban reporting service API
+# 
+# See the IMPORTANT note in action.d/blocklist_de.conf for when to use this action.
+# Specify expected parameters in file action.d/blocklist_de.local or if the interpolation
+# `action_blocklist_de` used for the action, set value of `blocklist_de_apikey`
+# in your `jail.local` globally (section [DEFAULT]) or per specific jail section (resp. in 
+# corresponding jail.d/my-jail.local file).
+#
+action_blocklist_de  = blocklist_de[email="%(sender)s", service="%(__name__)s", apikey="%(blocklist_de_apikey)s", agent="%(fail2ban_agent)s"]
+
+# Report ban via badips.com, and use as blacklist
+#
+# See BadIPsAction docstring in config/action.d/badips.py for
+# documentation for this action.
+#
+# NOTE: This action relies on banaction being present on start and therefore
+# should be last action defined for a jail.
+#
+action_badips = badips.py[category="%(__name__)s", banaction="%(banaction)s", agent="%(fail2ban_agent)s"]
+#
+# Report ban via badips.com (uses action.d/badips.conf for reporting only)
+#
+action_badips_report = badips[category="%(__name__)s", agent="%(fail2ban_agent)s"]
+
+# Report ban via abuseipdb.com.
+#
+# See action.d/abuseipdb.conf for usage example and details.
+#
+action_abuseipdb = abuseipdb
+
+# Choose default action.  To change, just override value of 'action' with the
+# interpolation to the chosen action shortcut (e.g.  action_mw, action_mwl, etc) in jail.local
+# globally (section [DEFAULT]) or per specific section
+action = %(action_)s
+
+
+#
+# JAILS
+#
+
+#
+# SSH servers
+#
+
+[sshd]
+
+# To use more aggressive sshd modes set filter parameter "mode" in jail.local:
+# normal (default), ddos, extra or aggressive (combines all).
+# See "tests/files/logs/sshd" or "filter.d/sshd.conf" for usage example and details.
+#mode   = normal
+port    = ssh
+logpath = %(sshd_log)s
+backend = %(sshd_backend)s
+
+
+[dropbear]
+
+port     = ssh
+logpath  = %(dropbear_log)s
+backend  = %(dropbear_backend)s
+
+
+[selinux-ssh]
+
+port     = ssh
+logpath  = %(auditd_log)s
+
+
+#
+# HTTP servers
+#
+
+[apache-auth]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+
+
+[apache-badbots]
+# Ban hosts which agent identifies spammer robots crawling the web
+# for email addresses. The mail outputs are buffered.
+port     = http,https
+logpath  = %(apache_access_log)s
+bantime  = 48h
+maxretry = 1
+
+
+[apache-noscript]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+
+
+[apache-overflows]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+maxretry = 2
+
+
+[apache-nohome]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+maxretry = 2
+
+
+[apache-botsearch]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+maxretry = 2
+
+
+[apache-fakegooglebot]
+
+port     = http,https
+logpath  = %(apache_access_log)s
+maxretry = 1
+ignorecommand = %(ignorecommands_dir)s/apache-fakegooglebot <ip>
+
+
+[apache-modsecurity]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+maxretry = 2
+
+
+[apache-shellshock]
+
+port    = http,https
+logpath = %(apache_error_log)s
+maxretry = 1
+
+
+[openhab-auth]
+
+filter = openhab
+banaction = %(banaction_allports)s
+logpath = /opt/openhab/logs/request.log
+
+
+[nginx-http-auth]
+
+port    = http,https
+logpath = %(nginx_error_log)s
+
+# To use 'nginx-limit-req' jail you should have `ngx_http_limit_req_module` 
+# and define `limit_req` and `limit_req_zone` as described in nginx documentation
+# http://nginx.org/en/docs/http/ngx_http_limit_req_module.html
+# or for example see in 'config/filter.d/nginx-limit-req.conf'
+[nginx-limit-req]
+port    = http,https
+logpath = %(nginx_error_log)s
+
+[nginx-botsearch]
+
+port     = http,https
+logpath  = %(nginx_error_log)s
+maxretry = 2
+
+
+# Ban attackers that try to use PHP's URL-fopen() functionality
+# through GET/POST variables. - Experimental, with more than a year
+# of usage in production environments.
+
+[php-url-fopen]
+
+port    = http,https
+logpath = %(nginx_access_log)s
+          %(apache_access_log)s
+
+
+[suhosin]
+
+port    = http,https
+logpath = %(suhosin_log)s
+
+
+[lighttpd-auth]
+# Same as above for Apache's mod_auth
+# It catches wrong authentifications
+port    = http,https
+logpath = %(lighttpd_error_log)s
+
+
+#
+# Webmail and groupware servers
+#
+
+[roundcube-auth]
+
+port     = http,https
+logpath  = %(roundcube_errors_log)s
+# Use following line in your jail.local if roundcube logs to journal.
+#backend = %(syslog_backend)s
+
+
+[openwebmail]
+
+port     = http,https
+logpath  = /var/log/openwebmail.log
+
+
+[horde]
+
+port     = http,https
+logpath  = /var/log/horde/horde.log
+
+
+[groupoffice]
+
+port     = http,https
+logpath  = /home/groupoffice/log/info.log
+
+
+[sogo-auth]
+# Monitor SOGo groupware server
+# without proxy this would be:
+# port    = 20000
+port     = http,https
+logpath  = /var/log/sogo/sogo.log
+
+
+[tine20]
+
+logpath  = /var/log/tine20/tine20.log
+port     = http,https
+
+
+#
+# Web Applications
+#
+#
+
+[drupal-auth]
+
+port     = http,https
+logpath  = %(syslog_daemon)s
+backend  = %(syslog_backend)s
+
+[guacamole]
+
+port     = http,https
+logpath  = /var/log/tomcat*/catalina.out
+#logpath  = /var/log/guacamole.log
+
+[monit]
+#Ban clients brute-forcing the monit gui login
+port = 2812
+logpath  = /var/log/monit
+           /var/log/monit.log
+
+
+[webmin-auth]
+
+port    = 10000
+logpath = %(syslog_authpriv)s
+backend = %(syslog_backend)s
+
+
+[froxlor-auth]
+
+port    = http,https
+logpath  = %(syslog_authpriv)s
+backend  = %(syslog_backend)s
+
+
+#
+# HTTP Proxy servers
+#
+#
+
+[squid]
+
+port     =  80,443,3128,8080
+logpath = /var/log/squid/access.log
+
+
+[3proxy]
+
+port    = 3128
+logpath = /var/log/3proxy.log
+
+
+#
+# FTP servers
+#
+
+
+[proftpd]
+
+port     = ftp,ftp-data,ftps,ftps-data
+logpath  = %(proftpd_log)s
+backend  = %(proftpd_backend)s
+
+
+[pure-ftpd]
+
+port     = ftp,ftp-data,ftps,ftps-data
+logpath  = %(pureftpd_log)s
+backend  = %(pureftpd_backend)s
+
+
+[gssftpd]
+
+port     = ftp,ftp-data,ftps,ftps-data
+logpath  = %(syslog_daemon)s
+backend  = %(syslog_backend)s
+
+
+[wuftpd]
+
+port     = ftp,ftp-data,ftps,ftps-data
+logpath  = %(wuftpd_log)s
+backend  = %(wuftpd_backend)s
+
+
+[vsftpd]
+# or overwrite it in jails.local to be
+# logpath = %(syslog_authpriv)s
+# if you want to rely on PAM failed login attempts
+# vsftpd's failregex should match both of those formats
+port     = ftp,ftp-data,ftps,ftps-data
+logpath  = %(vsftpd_log)s
+
+
+#
+# Mail servers
+#
+
+# ASSP SMTP Proxy Jail
+[assp]
+
+port     = smtp,465,submission
+logpath  = /root/path/to/assp/logs/maillog.txt
+
+
+[courier-smtp]
+
+port     = smtp,465,submission
+logpath  = %(syslog_mail)s
+backend  = %(syslog_backend)s
+
+
+[postfix]
+# To use another modes set filter parameter "mode" in jail.local:
+mode    = more
+port    = smtp,465,submission
+logpath = %(postfix_log)s
+backend = %(postfix_backend)s
+
+
+[postfix-rbl]
+
+filter   = postfix[mode=rbl]
+port     = smtp,465,submission
+logpath  = %(postfix_log)s
+backend  = %(postfix_backend)s
+maxretry = 1
+
+
+[sendmail-auth]
+
+port    = submission,465,smtp
+logpath = %(syslog_mail)s
+backend = %(syslog_backend)s
+
+
+[sendmail-reject]
+# To use more aggressive modes set filter parameter "mode" in jail.local:
+# normal (default), extra or aggressive
+# See "tests/files/logs/sendmail-reject" or "filter.d/sendmail-reject.conf" for usage example and details.
+#mode    = normal
+port     = smtp,465,submission
+logpath  = %(syslog_mail)s
+backend  = %(syslog_backend)s
+
+
+[qmail-rbl]
+
+filter  = qmail
+port    = smtp,465,submission
+logpath = /service/qmail/log/main/current
+
+
+# dovecot defaults to logging to the mail syslog facility
+# but can be set by syslog_facility in the dovecot configuration.
+[dovecot]
+
+port    = pop3,pop3s,imap,imaps,submission,465,sieve
+logpath = %(dovecot_log)s
+backend = %(dovecot_backend)s
+
+
+[sieve]
+
+port   = smtp,465,submission
+logpath = %(dovecot_log)s
+backend = %(dovecot_backend)s
+
+
+[solid-pop3d]
+
+port    = pop3,pop3s
+logpath = %(solidpop3d_log)s
+
+
+[exim]
+# see filter.d/exim.conf for further modes supported from filter:
+#mode = normal
+port   = smtp,465,submission
+logpath = %(exim_main_log)s
+
+
+[exim-spam]
+
+port   = smtp,465,submission
+logpath = %(exim_main_log)s
+
+
+[kerio]
+
+port    = imap,smtp,imaps,465
+logpath = /opt/kerio/mailserver/store/logs/security.log
+
+
+#
+# Mail servers authenticators: might be used for smtp,ftp,imap servers, so
+# all relevant ports get banned
+#
+
+[courier-auth]
+
+port     = smtp,465,submission,imap,imaps,pop3,pop3s
+logpath  = %(syslog_mail)s
+backend  = %(syslog_backend)s
+
+
+[postfix-sasl]
+
+filter   = postfix[mode=auth]
+port     = smtp,465,submission,imap,imaps,pop3,pop3s
+# You might consider monitoring /var/log/mail.warn instead if you are
+# running postfix since it would provide the same log lines at the
+# "warn" level but overall at the smaller filesize.
+logpath  = %(postfix_log)s
+backend  = %(postfix_backend)s
+
+
+[perdition]
+
+port   = imap,imaps,pop3,pop3s
+logpath = %(syslog_mail)s
+backend = %(syslog_backend)s
+
+
+[squirrelmail]
+
+port = smtp,465,submission,imap,imap2,imaps,pop3,pop3s,http,https,socks
+logpath = /var/lib/squirrelmail/prefs/squirrelmail_access_log
+
+
+[cyrus-imap]
+
+port   = imap,imaps
+logpath = %(syslog_mail)s
+backend = %(syslog_backend)s
+
+
+[uwimap-auth]
+
+port   = imap,imaps
+logpath = %(syslog_mail)s
+backend = %(syslog_backend)s
+
+
+#
+#
+# DNS servers
+#
+
+
+# !!! WARNING !!!
+#   Since UDP is connection-less protocol, spoofing of IP and imitation
+#   of illegal actions is way too simple.  Thus enabling of this filter
+#   might provide an easy way for implementing a DoS against a chosen
+#   victim. See
+#    http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html
+#   Please DO NOT USE this jail unless you know what you are doing.
+#
+# IMPORTANT: see filter.d/named-refused for instructions to enable logging
+# This jail blocks UDP traffic for DNS requests.
+# [named-refused-udp]
+#
+# filter   = named-refused
+# port     = domain,953
+# protocol = udp
+# logpath  = /var/log/named/security.log
+
+# IMPORTANT: see filter.d/named-refused for instructions to enable logging
+# This jail blocks TCP traffic for DNS requests.
+
+[named-refused]
+
+port     = domain,953
+logpath  = /var/log/named/security.log
+
+
+[nsd]
+
+port     = 53
+action_  = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]
+           %(default/action_)s[name=%(__name__)s-udp, protocol="udp"]
+logpath = /var/log/nsd.log
+
+
+#
+# Miscellaneous
+#
+
+[asterisk]
+
+port     = 5060,5061
+action_  = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]
+           %(default/action_)s[name=%(__name__)s-udp, protocol="udp"]
+logpath  = /var/log/asterisk/messages
+maxretry = 10
+
+
+[freeswitch]
+
+port     = 5060,5061
+action_  = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]
+           %(default/action_)s[name=%(__name__)s-udp, protocol="udp"]
+logpath  = /var/log/freeswitch.log
+maxretry = 10
+
+
+# enable adminlog; it will log to a file inside znc's directory by default.
+[znc-adminlog]
+
+port     = 6667
+logpath  = /var/lib/znc/moddata/adminlog/znc.log
+
+
+# To log wrong MySQL access attempts add to /etc/my.cnf in [mysqld] or
+# equivalent section:
+# log-warnings = 2
+#
+# for syslog (daemon facility)
+# [mysqld_safe]
+# syslog
+#
+# for own logfile
+# [mysqld]
+# log-error=/var/log/mysqld.log
+[mysqld-auth]
+
+port     = 3306
+logpath  = %(mysql_log)s
+backend  = %(mysql_backend)s
+
+
+# Log wrong MongoDB auth (for details see filter 'filter.d/mongodb-auth.conf')
+[mongodb-auth]
+# change port when running with "--shardsvr" or "--configsvr" runtime operation
+port     = 27017
+logpath  = /var/log/mongodb/mongodb.log
+
+
+# Jail for more extended banning of persistent abusers
+# !!! WARNINGS !!!
+# 1. Make sure that your loglevel specified in fail2ban.conf/.local
+#    is not at DEBUG level -- which might then cause fail2ban to fall into
+#    an infinite loop constantly feeding itself with non-informative lines
+# 2. Increase dbpurgeage defined in fail2ban.conf to e.g. 648000 (7.5 days)
+#    to maintain entries for failed logins for sufficient amount of time
+[recidive]
+
+logpath  = /var/log/fail2ban.log
+banaction = %(banaction_allports)s
+bantime  = 1w
+findtime = 1d
+
+
+# Generic filter for PAM. Has to be used with action which bans all
+# ports such as iptables-allports, shorewall
+
+[pam-generic]
+# pam-generic filter can be customized to monitor specific subset of 'tty's
+banaction = %(banaction_allports)s
+logpath  = %(syslog_authpriv)s
+backend  = %(syslog_backend)s
+
+
+[xinetd-fail]
+
+banaction = iptables-multiport-log
+logpath   = %(syslog_daemon)s
+backend   = %(syslog_backend)s
+maxretry  = 2
+
+
+# stunnel - need to set port for this
+[stunnel]
+
+logpath = /var/log/stunnel4/stunnel.log
+
+
+[ejabberd-auth]
+
+port    = 5222
+logpath = /var/log/ejabberd/ejabberd.log
+
+
+[counter-strike]
+
+logpath = /opt/cstrike/logs/L[0-9]*.log
+tcpport = 27030,27031,27032,27033,27034,27035,27036,27037,27038,27039
+udpport = 1200,27000,27001,27002,27003,27004,27005,27006,27007,27008,27009,27010,27011,27012,27013,27014,27015
+action_  = %(default/action_)s[name=%(__name__)s-tcp, port="%(tcpport)s", protocol="tcp"]
+           %(default/action_)s[name=%(__name__)s-udp, port="%(udpport)s", protocol="udp"]
+
+[softethervpn]
+port     = 500,4500
+protocol = udp
+logpath  = /usr/local/vpnserver/security_log/*/sec.log
+
+[gitlab]
+port    = http,https
+logpath = /var/log/gitlab/gitlab-rails/application.log
+
+[grafana]
+port    = http,https
+logpath = /var/log/grafana/grafana.log
+
+[bitwarden]
+port    = http,https
+logpath = /home/*/bwdata/logs/identity/Identity/log.txt
+
+[centreon]
+port    = http,https
+logpath = /var/log/centreon/login.log
+
+# consider low maxretry and a long bantime
+# nobody except your own Nagios server should ever probe nrpe
+[nagios]
+
+logpath  = %(syslog_daemon)s     ; nrpe.cfg may define a different log_facility
+backend  = %(syslog_backend)s
+maxretry = 1
+
+
+[oracleims]
+# see "oracleims" filter file for configuration requirement for Oracle IMS v6 and above
+logpath = /opt/sun/comms/messaging64/log/mail.log_current
+banaction = %(banaction_allports)s
+
+[directadmin]
+logpath = /var/log/directadmin/login.log
+port = 2222
+
+[portsentry]
+logpath  = /var/lib/portsentry/portsentry.history
+maxretry = 1
+
+[pass2allow-ftp]
+# this pass2allow example allows FTP traffic after successful HTTP authentication
+port         = ftp,ftp-data,ftps,ftps-data
+# knocking_url variable must be overridden to some secret value in jail.local
+knocking_url = /knocking/
+filter       = apache-pass[knocking_url="%(knocking_url)s"]
+# access log of the website with HTTP auth
+logpath      = %(apache_access_log)s
+blocktype    = RETURN
+returntype   = DROP
+action       = %(action_)s[blocktype=%(blocktype)s, returntype=%(returntype)s,
+                        actionstart_on_demand=false, actionrepair_on_unban=true]
+bantime      = 1h
+maxretry     = 1
+findtime     = 1
+
+
+[murmur]
+# AKA mumble-server
+port     = 64738
+action_  = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]
+           %(default/action_)s[name=%(__name__)s-udp, protocol="udp"]
+logpath  = /var/log/mumble-server/mumble-server.log
+
+
+[screensharingd]
+# For Mac OS Screen Sharing Service (VNC)
+logpath  = /var/log/system.log
+logencoding = utf-8
+
+[haproxy-http-auth]
+# HAProxy by default doesn't log to file you'll need to set it up to forward
+# logs to a syslog server which would then write them to disk.
+# See "haproxy-http-auth" filter for a brief cautionary note when setting
+# maxretry and findtime.
+logpath  = /var/log/haproxy.log
+
+[slapd]
+port    = ldap,ldaps
+logpath = /var/log/slapd.log
+
+[domino-smtp]
+port    = smtp,ssmtp
+logpath = /home/domino01/data/IBM_TECHNICAL_SUPPORT/console.log
+
+[phpmyadmin-syslog]
+port    = http,https
+logpath = %(syslog_authpriv)s
+backend = %(syslog_backend)s
+
+
+[zoneminder]
+# Zoneminder HTTP/HTTPS web interface auth
+# Logs auth failures to apache2 error log
+port    = http,https
+logpath = %(apache_error_log)s
+
+[traefik-auth]
+# to use 'traefik-auth' filter you have to configure your Traefik instance,
+# see `filter.d/traefik-auth.conf` for details and service example.
+port    = http,https
+logpath = /var/log/traefik/access.log

etc/fail2ban/jail.d/defaults-debian.conf

@@ -0,0 +1,2 @@
+[sshd]
+enabled = true

etc/ntp.conf

@@ -0,0 +1,42 @@
+#
+# Ansible managed
+#
+
+# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
+
+driftfile /var/lib/ntp/ntp.drift
+
+# Enable this if you want statistics to be logged.
+#statsdir /var/log/ntpstats/
+
+statistics loopstats peerstats clockstats
+filegen loopstats file loopstats type day enable
+filegen peerstats file peerstats type day enable
+filegen clockstats file clockstats type day enable
+
+
+pool bg.pool.ntp.org minpoll 4 maxpoll 10 iburst burst
+server marla.ludost.net minpoll 4 maxpoll 10 iburst burst
+server tryler.ludost.net minpoll 4 maxpoll 10 iburst burst
+
+# hard backup
+pool 2.bg.pool.ntp.org minpoll 4 maxpoll 10 iburst burst
+
+# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
+# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
+# might also be helpful.
+#
+# Note that "restrict" applies to both servers and clients, so a configuration
+# that might be intended to block requests from certain clients could also end
+# up blocking replies from your own upstream servers.
+
+# By default, exchange time with everybody, but don't allow configuration.
+restrict -4 default kod notrap nomodify nopeer noquery limited
+restrict -6 default kod notrap nomodify nopeer noquery limited
+
+# Local users may interrogate the ntp server more closely.
+restrict 127.0.0.1
+restrict ::1
+
+# Needed for adding pool entries
+restrict source notrap nomodify noquery

etc/systemd/system/multi-user.target.wants/arpwatch.service

@@ -0,0 +1 @@
+/lib/systemd/system/arpwatch.service

etc/systemd/system/multi-user.target.wants/arpwatch@bond0.20.service

@@ -0,0 +1 @@
+/lib/systemd/system/arpwatch@.service

etc/systemd/system/multi-user.target.wants/arpwatch@bond0.21.service

@@ -0,0 +1 @@
+/lib/systemd/system/arpwatch@.service

etc/systemd/system/multi-user.target.wants/arpwatch@bond0.22.service

@@ -0,0 +1 @@
+/lib/systemd/system/arpwatch@.service

etc/systemd/system/multi-user.target.wants/arpwatch@bond0.23.service

@@ -0,0 +1 @@
+/lib/systemd/system/arpwatch@.service

etc/systemd/system/multi-user.target.wants/arpwatch@bond0.25.service

@@ -0,0 +1 @@
+/lib/systemd/system/arpwatch@.service

etc/systemd/system/multi-user.target.wants/arpwatch@bond0.29.service

@@ -0,0 +1 @@
+/lib/systemd/system/arpwatch@.service

etc/unbound/.gitignore

@@ -0,0 +1 @@
+*.key

etc/unbound/unbound.conf

@@ -0,0 +1,591 @@
+#Use this to include other text into the file.
+#include: "otherfile.conf"
+
+# The server clause sets the main parameters. 
+server:
+	# whitespace is not necessary, but looks cleaner.
+
+	# verbosity number, 0 is least verbose. 1 is default.
+	verbosity: 1
+
+	# print statistics to the log (for every thread) every N seconds.
+	# Set to "" or 0 to disable. Default is disabled.
+	# statistics-interval: 0
+
+	# enable cumulative statistics, without clearing them after printing.
+	# statistics-cumulative: no
+
+	# enable extended statistics (query types, answer codes, status)
+	# printed from unbound-control. default off, because of speed.
+	# extended-statistics: no
+
+	# number of threads to create. 1 disables threading.
+	# num-threads: 1
+
+	# specify the interfaces to answer queries from by ip-address.
+	# The default is to listen to localhost (127.0.0.1 and ::1).
+	# specify 0.0.0.0 and ::0 to bind to all available interfaces.
+	# specify every interface[@port] on a new 'interface:' labelled line.
+	# The listen interfaces are not changed on reload, only on restart.
+	# interface: 192.0.2.153
+	# interface: 192.0.2.154
+	# interface: 192.0.2.154@5003
+	# interface: 2001:DB8::5
+	interface: 0.0.0.0
+	interface: ::0
+
+	# enable this feature to copy the source address of queries to reply.
+	# Socket options are not supported on all platforms. experimental. 
+	interface-automatic: no
+
+	# port to answer queries from
+	# port: 53
+
+	# specify the interfaces to send outgoing queries to authoritative
+	# server from by ip-address. If none, the default (all) interface
+	# is used. Specify every interface on a 'outgoing-interface:' line.
+	# outgoing-interface: 192.0.2.153
+	# outgoing-interface: 2001:DB8::5
+	# outgoing-interface: 2001:DB8::6
+
+	# number of ports to allocate per thread, determines the size of the
+	# port range that can be open simultaneously.  About double the
+	# num-queries-per-thread, or, use as many as the OS will allow you.
+	# outgoing-range: 4096
+
+	# permit unbound to use this port number or port range for
+	# making outgoing queries, using an outgoing interface.
+	# outgoing-port-permit: 32768
+
+	# deny unbound the use this of port number or port range for
+	# making outgoing queries, using an outgoing interface.
+	# Use this to make sure unbound does not grab a UDP port that some
+	# other server on this computer needs. The default is to avoid
+	# IANA-assigned port numbers.
+	# If multiple outgoing-port-permit and outgoing-port-avoid options
+	# are present, they are processed in order.
+	# outgoing-port-avoid: "3200-3208"
+
+	# number of outgoing simultaneous tcp buffers to hold per thread.
+	# outgoing-num-tcp: 10
+
+	# number of incoming simultaneous tcp buffers to hold per thread.
+	# incoming-num-tcp: 10
+
+	# buffer size for UDP port 53 incoming (SO_RCVBUF socket option).
+	# 0 is system default.  Use 4m to catch query spikes for busy servers.
+	# so-rcvbuf: 0
+
+	# buffer size for UDP port 53 outgoing (SO_SNDBUF socket option).
+	# 0 is system default.  Use 4m to handle spikes on very busy servers.
+	# so-sndbuf: 0
+	
+	# on Linux(3.9+) use SO_REUSEPORT to distribute queries over threads.
+	# so-reuseport: no
+
+	# EDNS reassembly buffer to advertise to UDP peers (the actual buffer
+	# is set with msg-buffer-size). 1480 can solve fragmentation (timeouts).
+	# edns-buffer-size: 4096
+
+	# Maximum UDP response size (not applied to TCP response).
+	# Suggested values are 512 to 4096. Default is 4096. 65536 disables it.
+	# max-udp-size: 4096
+
+	# buffer size for handling DNS data. No messages larger than this
+	# size can be sent or received, by UDP or TCP. In bytes.
+	# msg-buffer-size: 65552
+
+	# the amount of memory to use for the message cache.
+	# plain value in bytes or you can append k, m or G. default is "4Mb". 
+	# msg-cache-size: 4m
+
+	# the number of slabs to use for the message cache.
+	# the number of slabs must be a power of 2.
+	# more slabs reduce lock contention, but fragment memory usage.
+	# msg-cache-slabs: 4
+
+	# the number of queries that a thread gets to service.
+	# num-queries-per-thread: 1024
+
+	# if very busy, 50% queries run to completion, 50% get timeout in msec
+	# jostle-timeout: 200
+	
+	# msec to wait before close of port on timeout UDP. 0 disables.
+	# delay-close: 0
+
+	# the amount of memory to use for the RRset cache.
+	# plain value in bytes or you can append k, m or G. default is "4Mb". 
+	# rrset-cache-size: 4m
+
+	# the number of slabs to use for the RRset cache.
+	# the number of slabs must be a power of 2.
+	# more slabs reduce lock contention, but fragment memory usage.
+	# rrset-cache-slabs: 4
+
+	# the time to live (TTL) value lower bound, in seconds. Default 0.
+	# If more than an hour could easily give trouble due to stale data.
+	# cache-min-ttl: 0
+
+	# the time to live (TTL) value cap for RRsets and messages in the
+	# cache. Items are not cached for longer. In seconds.
+	# cache-max-ttl: 86400
+
+	# the time to live (TTL) value for cached roundtrip times, lameness and
+	# EDNS version information for hosts. In seconds.
+	# infra-host-ttl: 900
+
+	# the number of slabs to use for the Infrastructure cache.
+	# the number of slabs must be a power of 2.
+	# more slabs reduce lock contention, but fragment memory usage.
+	# infra-cache-slabs: 4
+
+	# the maximum number of hosts that are cached (roundtrip, EDNS, lame).
+	# infra-cache-numhosts: 10000
+
+	# Enable IPv4, "yes" or "no".
+	# do-ip4: yes
+
+	# Enable IPv6, "yes" or "no".
+	# do-ip6: yes
+
+	# Enable UDP, "yes" or "no".
+	# do-udp: yes
+
+	# Enable TCP, "yes" or "no".
+	# do-tcp: yes
+
+	# upstream connections use TCP only (and no UDP), "yes" or "no"
+	# useful for tunneling scenarios, default no.
+	# tcp-upstream: no
+
+	# Detach from the terminal, run in background, "yes" or "no".
+	# do-daemonize: yes
+
+	# control which clients are allowed to make (recursive) queries
+	# to this server. Specify classless netblocks with /size and action.
+	# By default everything is refused, except for localhost.
+	# Choose deny (drop message), refuse (polite error reply),
+	# allow (recursive ok), allow_snoop (recursive and nonrecursive ok)
+	# deny_non_local (drop queries unless can be answered from local-data)
+	# refuse_non_local (like deny_non_local but polite error reply).
+	access-control: 0.0.0.0/0 refuse
+	access-control: 127.0.0.0/8 allow
+	access-control: 10.20.0.0/8 allow
+	access-control: 192.168.0.0/16 allow
+	access-control: ::0/0 refuse
+	access-control: ::1 allow
+	access-control: ::ffff:127.0.0.1 allow
+	access-control: 2001:67c:21bc:30::/60 allow
+
+	# if given, a chroot(2) is done to the given directory.
+	# i.e. you can chroot to the working directory, for example,
+	# for extra security, but make sure all files are in that directory.
+	#
+	# If chroot is enabled, you should pass the configfile (from the
+	# commandline) as a full path from the original root. After the
+	# chroot has been performed the now defunct portion of the config 
+	# file path is removed to be able to reread the config after a reload. 
+	#
+	# All other file paths (working dir, logfile, roothints, and
+	# key files) can be specified in several ways:
+	# 	o as an absolute path relative to the new root.
+	# 	o as a relative path to the working directory.
+	# 	o as an absolute path relative to the original root.
+	# In the last case the path is adjusted to remove the unused portion.
+	#
+	# The pid file can be absolute and outside of the chroot, it is 
+	# written just prior to performing the chroot and dropping permissions.
+	#
+	# Additionally, unbound may need to access /dev/random (for entropy).
+	# How to do this is specific to your OS.
+	#
+	# If you give "" no chroot is performed. The path must not end in a /.
+	# chroot: "/etc/unbound"
+
+	# if given, user privileges are dropped (after binding port),
+	# and the given username is assumed. Default is user "unbound".
+	# If you give "" no privileges are dropped.
+	# username: "unbound"
+
+	# the working directory. The relative files in this config are 
+	# relative to this directory. If you give "" the working directory
+	# is not changed.
+	# directory: "/etc/unbound"
+
+	# the log file, "" means log to stderr. 
+	# Use of this option sets use-syslog to "no".
+	# logfile: ""
+
+	# Log to syslog(3) if yes. The log facility LOG_DAEMON is used to 
+	# log to, with identity "unbound". If yes, it overrides the logfile.
+	# use-syslog: yes 
+
+	# print UTC timestamp in ascii to logfile, default is epoch in seconds.
+	# log-time-ascii: no
+	
+	# print one line with time, IP, name, type, class for every query.
+	# log-queries: no
+
+	# the pid file. Can be an absolute path outside of chroot/work dir.
+	# pidfile: "/etc/unbound/unbound.pid"
+
+	# file to read root hints from.
+	# get one from ftp://FTP.INTERNIC.NET/domain/named.cache
+	# root-hints: ""
+
+	# enable to not answer id.server and hostname.bind queries.
+	# hide-identity: no
+
+	# enable to not answer version.server and version.bind queries.
+	# hide-version: no
+
+	# the identity to report. Leave "" or default to return hostname.
+	# identity: ""
+
+	# the version to report. Leave "" or default to return package version.
+	# version: ""
+
+	# the target fetch policy.
+	# series of integers describing the policy per dependency depth. 
+	# The number of values in the list determines the maximum dependency 
+	# depth the recursor will pursue before giving up. Each integer means:
+	# 	-1 : fetch all targets opportunistically,
+	# 	0: fetch on demand,
+	#	positive value: fetch that many targets opportunistically.
+	# Enclose the list of numbers between quotes ("").
+	# target-fetch-policy: "3 2 1 0 0"
+
+	# Harden against very small EDNS buffer sizes. 
+	harden-short-bufsize: yes
+
+	# Harden against unseemly large queries.
+	harden-large-queries: yes
+
+	# Harden against out of zone rrsets, to avoid spoofing attempts. 
+	harden-glue: yes
+
+	# Harden against receiving dnssec-stripped data. If you turn it
+	# off, failing to validate dnskey data for a trustanchor will 
+	# trigger insecure mode for that zone (like without a trustanchor).
+	# Default on, which insists on dnssec data for trust-anchored zones.
+	# harden-dnssec-stripped: yes
+
+	# Harden against queries that fall under dnssec-signed nxdomain names.
+	# harden-below-nxdomain: no
+
+        # Harden the referral path by performing additional queries for
+	# infrastructure data.  Validates the replies (if possible).
+	# Default off, because the lookups burden the server.  Experimental 
+	# implementation of draft-wijngaards-dnsext-resolver-side-mitigation.
+	# harden-referral-path: no
+
+	# Use 0x20-encoded random bits in the query to foil spoof attempts.
+	# This feature is an experimental implementation of draft dns-0x20.
+	# use-caps-for-id: no
+
+	# Enforce privacy of these addresses. Strips them away from answers. 
+	# It may cause DNSSEC validation to additionally mark it as bogus. 
+	# Protects against 'DNS Rebinding' (uses browser as network proxy). 
+	# Only 'private-domain' and 'local-data' names are allowed to have 
+	# these private addresses. No default.
+	# private-address: 10.0.0.0/8
+	# private-address: 172.16.0.0/12
+	# private-address: 192.168.0.0/16
+	# private-address: 169.254.0.0/16
+	# private-address: fd00::/8
+	# private-address: fe80::/10
+
+	# Allow the domain (and its subdomains) to contain private addresses.
+	# local-data statements are allowed to contain private addresses too.
+	# private-domain: "example.com"
+
+	# If nonzero, unwanted replies are not only reported in statistics,
+	# but also a running total is kept per thread. If it reaches the
+	# threshold, a warning is printed and a defensive action is taken,
+	# the cache is cleared to flush potential poison out of it.
+	# A suggested value is 10000000, the default is 0 (turned off).
+	# unwanted-reply-threshold: 0
+
+	# Do not query the following addresses. No DNS queries are sent there.
+	# List one address per entry. List classless netblocks with /size,
+	# do-not-query-address: 127.0.0.1/8
+	# do-not-query-address: ::1
+
+	# if yes, the above default do-not-query-address entries are present.
+	# if no, localhost can be queried (for testing and debugging).
+	# do-not-query-localhost: yes
+
+	# if yes, perform prefetching of almost expired message cache entries.
+	# prefetch: no
+
+	# if yes, perform key lookups adjacent to normal lookups.
+	# prefetch-key: no
+
+	# if yes, Unbound rotates RRSet order in response.
+	# rrset-roundrobin: no
+
+	# if yes, Unbound doesn't insert authority/additional sections
+	# into response messages when those sections are not required.
+	minimal-responses: yes
+
+	# module configuration of the server. A string with identifiers
+	# separated by spaces. "iterator" or "validator iterator"
+	# module-config: "validator iterator"
+
+	# File with trusted keys, kept uptodate using RFC5011 probes,
+	# initial file like trust-anchor-file, then it stores metadata.
+	# Use several entries, one per domain name, to track multiple zones.
+	#
+	# If you want to perform DNSSEC validation, run unbound-anchor before
+	# you start unbound (i.e. in the system boot scripts).  And enable:
+	# Please note usage of unbound-anchor root anchor is at your own risk
+	# and under the terms of our LICENSE (see that file in the source).
+	# auto-trust-anchor-file: "/etc/unbound/root.key"
+
+	# File with DLV trusted keys. Same format as trust-anchor-file.
+	# There can be only one DLV configured, it is trusted from root down.
+	# Download http://ftp.isc.org/www/dlv/dlv.isc.org.key
+	# dlv-anchor-file: "dlv.isc.org.key"
+
+	# File with trusted keys for validation. Specify more than one file
+	# with several entries, one file per entry.
+	# Zone file format, with DS and DNSKEY entries.
+	# Note this gets out of date, use auto-trust-anchor-file please.
+	# trust-anchor-file: ""
+	
+	# Trusted key for validation. DS or DNSKEY. specify the RR on a
+	# single line, surrounded by "". TTL is ignored. class is IN default.
+	# Note this gets out of date, use auto-trust-anchor-file please.
+	# (These examples are from August 2007 and may not be valid anymore).
+	# trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ=="
+	# trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A"
+
+	# File with trusted keys for validation. Specify more than one file
+	# with several entries, one file per entry. Like trust-anchor-file
+	# but has a different file format. Format is BIND-9 style format, 
+	# the trusted-keys { name flag proto algo "key"; }; clauses are read.
+	# you need external update procedures to track changes in keys.
+	# trusted-keys-file: ""
+
+	# Ignore chain of trust. Domain is treated as insecure.
+	# domain-insecure: "example.com"
+
+	# Override the date for validation with a specific fixed date.
+	# Do not set this unless you are debugging signature inception
+	# and expiration. "" or "0" turns the feature off. -1 ignores date.
+	# val-override-date: ""
+
+	# The time to live for bogus data, rrsets and messages. This avoids
+	# some of the revalidation, until the time interval expires. in secs.
+	# val-bogus-ttl: 60
+
+	# The signature inception and expiration dates are allowed to be off
+	# by 10% of the signature lifetime (expir-incep) from our local clock.
+	# This leeway is capped with a minimum and a maximum.  In seconds.
+	# val-sig-skew-min: 3600
+	# val-sig-skew-max: 86400
+
+	# Should additional section of secure message also be kept clean of
+	# unsecure data. Useful to shield the users of this validator from
+	# potential bogus data in the additional section. All unsigned data 
+	# in the additional section is removed from secure messages.
+	# val-clean-additional: yes
+
+	# Turn permissive mode on to permit bogus messages. Thus, messages
+	# for which security checks failed will be returned to clients,
+	# instead of SERVFAIL. It still performs the security checks, which
+	# result in interesting log files and possibly the AD bit in
+	# replies if the message is found secure. The default is off.
+	# val-permissive-mode: no
+
+	# Ignore the CD flag in incoming queries and refuse them bogus data.
+	# Enable it if the only clients of unbound are legacy servers (w2008)
+	# that set CD but cannot validate themselves.
+	# ignore-cd-flag: no
+
+	# Have the validator log failed validations for your diagnosis.
+	# 0: off. 1: A line per failed user query. 2: With reason and bad IP.
+	# val-log-level: 0
+
+	# It is possible to configure NSEC3 maximum iteration counts per
+	# keysize. Keep this table very short, as linear search is done.
+	# A message with an NSEC3 with larger count is marked insecure.
+	# List in ascending order the keysize and count values.
+	# val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500"
+	
+	# instruct the auto-trust-anchor-file probing to add anchors after ttl.
+	# add-holddown: 2592000 # 30 days
+
+	# instruct the auto-trust-anchor-file probing to del anchors after ttl.
+	# del-holddown: 2592000 # 30 days
+
+	# auto-trust-anchor-file probing removes missing anchors after ttl.
+	# If the value 0 is given, missing anchors are not removed.
+	# keep-missing: 31622400 # 366 days
+
+	# the amount of memory to use for the key cache.
+	# plain value in bytes or you can append k, m or G. default is "4Mb". 
+	# key-cache-size: 4m
+
+	# the number of slabs to use for the key cache.
+	# the number of slabs must be a power of 2.
+	# more slabs reduce lock contention, but fragment memory usage.
+	# key-cache-slabs: 4
+
+	# the amount of memory to use for the negative cache (used for DLV).
+	# plain value in bytes or you can append k, m or G. default is "1Mb". 
+	# neg-cache-size: 1m
+
+	# By default, for a number of zones a small default 'nothing here'
+	# reply is built-in.  Query traffic is thus blocked.  If you
+	# wish to serve such zone you can unblock them by uncommenting one
+	# of the nodefault statements below.
+	# You may also have to use domain-insecure: zone to make DNSSEC work,
+	# unless you have your own trust anchors for this zone.
+	# local-zone: "localhost." nodefault
+	# local-zone: "127.in-addr.arpa." nodefault
+	# local-zone: "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa." nodefault
+	# local-zone: "10.in-addr.arpa." nodefault
+	# local-zone: "16.172.in-addr.arpa." nodefault
+	# local-zone: "17.172.in-addr.arpa." nodefault
+	# local-zone: "18.172.in-addr.arpa." nodefault
+	# local-zone: "19.172.in-addr.arpa." nodefault
+	# local-zone: "20.172.in-addr.arpa." nodefault
+	# local-zone: "21.172.in-addr.arpa." nodefault
+	# local-zone: "22.172.in-addr.arpa." nodefault
+	# local-zone: "23.172.in-addr.arpa." nodefault
+	# local-zone: "24.172.in-addr.arpa." nodefault
+	# local-zone: "25.172.in-addr.arpa." nodefault
+	# local-zone: "26.172.in-addr.arpa." nodefault
+	# local-zone: "27.172.in-addr.arpa." nodefault
+	# local-zone: "28.172.in-addr.arpa." nodefault
+	# local-zone: "29.172.in-addr.arpa." nodefault
+	# local-zone: "30.172.in-addr.arpa." nodefault
+	# local-zone: "31.172.in-addr.arpa." nodefault
+	# local-zone: "168.192.in-addr.arpa." nodefault
+	# local-zone: "0.in-addr.arpa." nodefault
+	# local-zone: "254.169.in-addr.arpa." nodefault
+	# local-zone: "2.0.192.in-addr.arpa." nodefault
+	# local-zone: "100.51.198.in-addr.arpa." nodefault
+	# local-zone: "113.0.203.in-addr.arpa." nodefault
+	# local-zone: "255.255.255.255.in-addr.arpa." nodefault
+	# local-zone: "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa." nodefault
+	# local-zone: "d.f.ip6.arpa." nodefault
+	# local-zone: "8.e.f.ip6.arpa." nodefault
+	# local-zone: "9.e.f.ip6.arpa." nodefault
+	# local-zone: "a.e.f.ip6.arpa." nodefault
+	# local-zone: "b.e.f.ip6.arpa." nodefault
+	# local-zone: "8.b.d.0.1.0.0.2.ip6.arpa." nodefault
+
+	# a number of locally served zones can be configured.
+	# 	local-zone: <zone> <type>
+	# 	local-data: "<resource record string>"
+	# o deny serves local data (if any), else, drops queries. 
+	# o refuse serves local data (if any), else, replies with error.
+	# o static serves local data, else, nxdomain or nodata answer.
+	# o transparent gives local data, but resolves normally for other names
+	# o redirect serves the zone data for any subdomain in the zone.
+	# o nodefault can be used to normally resolve AS112 zones.
+	# o typetransparent resolves normally for other types and other names
+	#
+	# defaults are localhost address, reverse for 127.0.0.1 and ::1
+	# and nxdomain for AS112 zones. If you configure one of these zones
+	# the default content is omitted, or you can omit it with 'nodefault'.
+	# 
+	# If you configure local-data without specifying local-zone, by
+	# default a transparent local-zone is created for the data.
+	#
+	# You can add locally served data with
+	# local-zone: "local." static
+	# local-data: "mycomputer.local. IN A 192.0.2.51"
+	# local-data: 'mytext.local TXT "content of text record"'
+	#
+	# You can override certain queries with
+	# local-data: "adserver.example.com A 127.0.0.1"
+	#
+	# You can redirect a domain to a fixed address with
+	# (this makes example.com, www.example.com, etc, all go to 192.0.2.3)
+	# local-zone: "example.com" redirect
+	# local-data: "example.com A 192.0.2.3"
+	#
+	# Shorthand to make PTR records, "IPv4 name" or "IPv6 name".
+	# You can also add PTR records using local-data directly, but then
+	# you need to do the reverse notation yourself.
+	# local-data-ptr: "192.0.2.3 www.example.com"
+
+	# service clients over SSL (on the TCP sockets), with plain DNS inside
+	# the SSL stream.  Give the certificate to use and private key.
+	# default is "" (disabled).  requires restart to take effect.
+	# ssl-service-key: "path/to/privatekeyfile.key"
+	# ssl-service-pem: "path/to/publiccertfile.pem"
+	# ssl-port: 443
+
+	# request upstream over SSL (with plain DNS inside the SSL stream).
+	# Default is no.  Can be turned on and off with unbound-control.
+	# ssl-upstream: no
+
+# Python config section. To enable:
+# o use --with-pythonmodule to configure before compiling.
+# o list python in the module-config string (above) to enable.
+# o and give a python-script to run.
+python:
+	# Script file to load
+	# python-script: "/etc/unbound/ubmodule-tst.py"
+
+# Remote control config section. 
+remote-control:
+	# Enable remote control with unbound-control(8) here.
+	# set up the keys and certificates with unbound-control-setup.
+	 control-enable: yes
+
+	# what interfaces are listened to for remote control.
+	# give 0.0.0.0 and ::0 to listen to all interfaces.
+	# control-interface: 127.0.0.1
+	# control-interface: ::1
+
+	# port number for remote control operations.
+	 control-port: 8953
+
+	# unbound server key file.
+	# server-key-file: "/etc/unbound/unbound_server.key"
+
+	# unbound server certificate file.
+	# server-cert-file: "/etc/unbound/unbound_server.pem"
+
+	# unbound-control key file.
+	# control-key-file: "/etc/unbound/unbound_control.key"
+
+	# unbound-control certificate file.
+	# control-cert-file: "/etc/unbound/unbound_control.pem"
+
+# Stub zones.
+# Create entries like below, to make all queries for 'example.com' and 
+# 'example.org' go to the given list of nameservers. list zero or more 
+# nameservers by hostname or by ipaddress. If you set stub-prime to yes, 
+# the list is treated as priming hints (default is no).
+# With stub-first yes, it attempts without the stub if it fails.
+# stub-zone:
+#	name: "example.com"
+#	stub-addr: 192.0.2.68
+#	stub-prime: no
+#	stub-first: no
+# stub-zone:
+#	name: "example.org"
+#	stub-host: ns.example.com.
+
+# Forward zones
+# Create entries like below, to make all queries for 'example.com' and
+# 'example.org' go to the given list of servers. These servers have to handle
+# recursion to other nameservers. List zero or more nameservers by hostname
+# or by ipaddress. Use an entry with name "." to forward all queries.
+# If you enable forward-first, it attempts without the forward if it fails.
+# forward-zone:
+# 	name: "example.com"
+# 	forward-addr: 192.0.2.68
+# 	forward-addr: 192.0.2.73@5355  # forward to port 5355.
+# 	forward-first: no
+# forward-zone:
+# 	name: "example.org"
+# 	forward-host: fwd.example.com
+
+include: "/etc/unbound/unbound.conf.d/*.conf"

etc/unbound/unbound.conf.d/local-hosts.conf

@@ -0,0 +1,84 @@
+server:
+	# servers
+	local-data: "vin 30 in a 10.20.0.1"
+	local-data-ptr: "10.20.0.1 30 vin"
+
+	# switches
+	local-data: "coresw 30 in a 10.20.0.11"
+	local-data-ptr: "10.20.0.11 30 coresw"
+
+	local-data: "f0sw 30 in a 10.20.0.15"
+	local-data-ptr: "10.20.0.15 30 f0sw"
+
+	local-data: "nocsw 30 in a 10.20.0.28"
+	local-data-ptr: "10.20.0.28 30 nocsw"
+
+	local-data: "receptionsw 30 in a 10.20.0.25"
+	local-data-ptr: "10.20.0.25 30 receptionsw"
+
+	local-data: "teamsw 30 in a 10.20.0.26"
+	local-data-ptr: "10.20.0.26 30 teamsw"
+
+	local-data: "vocsw-a 30 in a 10.20.0.21"
+	local-data-ptr: "10.20.0.21 30 vocsw-a"
+
+	local-data: "vocsw-b 30 in a 10.20.0.22"
+	local-data-ptr: "10.20.0.22 30 vocsw-b"
+
+	# AP
+	local-data: "ap-cf-f-l 30 in a 10.20.0.50"
+	local-data-ptr: "10.20.0.50 30 ap-cf-f-l"
+
+	local-data: "ap-cf-f-r 30 in a 10.20.0.51"
+	local-data-ptr: "10.20.0.51 30 ap-cf-f-r"
+
+	local-data: "ap-cf-a1 30 in a 10.20.0.52"
+	local-data-ptr: "10.20.0.52 30 ap-cf-a1"
+
+	local-data: "ap-cf-a2 30 in a 10.20.0.53"
+	local-data-ptr: "10.20.0.53 30 ap-cf-a2"
+
+	local-data: "ap-cf-b1 30 in a 10.20.0.54"
+	local-data-ptr: "10.20.0.54 30 ap-cf-b1"
+
+	local-data: "ap-cf-srv 30 in a 10.20.0.55"
+	local-data-ptr: "10.20.0.55 30 ap-cf-srv"
+
+	local-data: "ap-cf-c1 30 in a 10.20.0.56"
+	local-data-ptr: "10.20.0.56 30 ap-cf-c1"
+
+	local-data: "ap-cf-ch 30 in a 10.20.0.58"
+	local-data-ptr: "10.20.0.58 30 ap-cf-ch"
+
+	local-data: "ap-cf-qws 30 in a 10.20.0.59"
+	local-data-ptr: "10.20.0.59 30 ap-cf-qws"
+
+	local-data: "ap-ws-ws1 30 in a 10.20.0.60"
+	local-data-ptr: "10.20.0.60 30 ap-ws-ws1"
+
+	local-data: "ap-ws-ws2 30 in a 10.20.0.61"
+	local-data-ptr: "10.20.0.61 30 ap-ws-ws2"
+
+	local-data: "ap-ws-noc 30 in a 10.20.0.62"
+	local-data-ptr: "10.20.0.62 30 ap-ws-noc"
+
+	local-data: "ap-spare-1 30 in a 10.20.0.63"
+	local-data-ptr: "10.20.0.63 30 ap-spare-1"
+
+	local-data: "ap-spare-2 30 in a 10.20.0.64"
+	local-data-ptr: "10.20.0.64 30 ap-spare-2"
+
+	local-data: "ap-spare-3 30 in a 10.20.0.65"
+	local-data-ptr: "10.20.0.65 30 ap-spare-3"
+
+	local-data: "scaler-A 30 in a 10.23.0.6"
+	local-data-ptr: "10.23.0.6 30 scaler-A"
+
+	local-data: "tv-1 30 in a 10.24.0.11"
+	local-data-ptr: "10.24.0.11 30 tv-1"
+
+	local-data: "tv-2 30 in a 10.24.0.12"
+	local-data-ptr: "10.24.0.12 30 tv-2"
+
+	local-data: "printer-1 30 in a 10.25.0.11"
+	local-data-ptr: "10.25.0.11 30 printer-1"

etc/unbound/unbound.conf.d/root-auto-trust-anchor-file.conf

@@ -0,0 +1,4 @@
+server:
+    # The following line will configure unbound to perform cryptographic
+    # DNSSEC validation using the root trust anchor.
+    auto-trust-anchor-file: "/var/lib/unbound/root.key"

etc/unbound/unbound_control.pem

@@ -0,0 +1,22 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

etc/unbound/unbound_server.pem

@@ -0,0 +1,22 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

root/.gitconfig

@@ -0,0 +1,13 @@
+# This is Git's per-user configuration file.
+[user]
+# Please adapt and uncomment the following lines:
+	name = "OpenFest Server User"
+	email = core@openfest.org
+
+[alias]
+	co = checkout
+	ci = commit
+	hist = log --pretty=format:'%h %ad | %s%d [%an]' --graph --date=short
+	synctags = "!if [ $(git remote show | wc -l) -gt 1 ] ; then for r in $(git remote show) ; do echo \"Fetching $r ...\" ; git fetch $r ; done && git push --tags origin; fi"
+  vvci = commit --author='Vladimir Vitkov <vvitkov@gmail.com>'
+  rpci = commit --author='robotpanic <kalin.t.iliev@gmail.com>'