Switch configurations for Openfest 2023

General port layout

The following scheme is followed:

Last copper port on the switch is UPLINK
- Uplink is trunk mode with access as a minimum to mgmt vlan (20) and purpose speciffic vlan (e.g. video (23))
First copper port on the switch is PHONE (if such are required)
- mode is access
- VLAN 25
Next up to 6 ports are for speciffic purposes (e.g. video related, general access, etc)
- Mode is access (unless specific equipment requires other. e.g. wifi is connected to this port)
- VLAN varies

There are 4 exceptions from the scheme:

coresw - links all the rest so it is expected to be different
- Uplink is last XX port(s)
- Ports 41 to 46 are reserved for internal services
- Downlinks to switches are on ports 1-6
- WIFI access is as follows:
  - XXXX
nocsw - needs easy access to all vlans on ports so all vlans are present there
- Multiple ports per vlan are present
- Port 1,2 - Phone access
- Port 3,4 - External vlan access
- Port 5,6 - mgmt vlan
- Port 7,8 - wired vlan
- Port 9,10 - wireless vlan
- Port 11-14 - video vlan - monitoring stations to be put
- Port 15,16 - overflow vlan
- Port 17-22 - shutdown (spare). NOC can use as wanted.
- Port 23,24 - UPLINK
connectionsw - special switch to do media conversion between Single and Multi-mode optic
- Ports 9 and 10 are fiber
- Might not have IP (or any other config for that matter)
- All copper ports are shutdown
fl2sw - switch located in floor 2 (-1) to facilitate own equipment usage
- last 2 ports are trunked uplink