Introduce single trunk DAP config

ar71xx-lede.configdiff

@@ -31,7 +31,7 @@ CONFIG_PACKAGE_horst=y
 CONFIG_PACKAGE_hostapd-utils=y
 CONFIG_PACKAGE_ip6tables=m
 CONFIG_PACKAGE_iptables=m
-CONFIG_PACKAGE_iwinfo=y
+CONFIG_PACKAGE_kmod-ath10k=y
 CONFIG_PACKAGE_kmod-br-netfilter=y
 CONFIG_PACKAGE_kmod-bridge=y
 CONFIG_PACKAGE_kmod-ebtables=y
@@ -47,7 +47,6 @@ CONFIG_PACKAGE_kmod-nf-nat=m
 CONFIG_PACKAGE_kmod-stp=y
 CONFIG_PACKAGE_libgmp=y
 CONFIG_PACKAGE_libip6tc=m
-CONFIG_PACKAGE_libiwinfo=y
 CONFIG_PACKAGE_libltdl=y
 CONFIG_PACKAGE_liblua=y
 CONFIG_PACKAGE_libmnl=y
@@ -75,3 +74,4 @@ CONFIG_PACKAGE_wpad=y
 # CONFIG_PACKAGE_wpad-mini is not set
 CONFIG_PACKAGE_zlib=y
 CONFIG_WPA_SUPPLICANT_INTERNAL=y
+CONFIG_PACKAGE_ath10k-firmware-qca988x=m

files/dap2965-single-trunk/etc/config/network

@@ -0,0 +1,41 @@
+config interface 'loopback'
+        option ifname 'lo'
+        option proto 'static'
+        option ipaddr '127.0.0.1'
+        option netmask '255.0.0.0'
+
+config interface 'management'
+        option ifname 'eth0'
+        option proto 'static'
+        option ipaddr '<ip>'
+        option netmask '255.255.255.0'
+        option gateway '10.20.0.1'
+        option dns '10.20.0.1'
+        option ipv6 'no'
+
+config interface 'wireless'
+        option ifname 'eth1'
+        option proto 'none'
+        option ipv6 'no'
+        option force_link '1'
+        option type 'bridge'
+
+config switch
+        option name 'switch0'
+        option reset '1'
+        option enable_vlan '1'
+
+config switch
+	option name 'switch0'
+	option reset '1'
+	option enable_vlan '1'
+
+config switch_vlan
+	option device 'switch0'
+	option vlan '20'
+	option ports '0 2t'
+
+config switch_vlan
+	option device 'switch0'
+	option vlan '22'
+	option ports '2t 6'

files/dap2965/etc/config/system

@@ -0,0 +1,35 @@
+
+config system
+	option hostname '<hostname>'
+	option zonename 'Europe/Sofia'
+	option timezone 'EET-2EEST,M3.5.0/3,M10.5.0/4'
+	option log_ip '10.20.0.1'
+	option log_remote '1'
+	option ttylogin '0'
+	option log_size '64'
+	option urandom_seed '0'j
+
+config timeserver 'ntp'
+	list server '0.openwrt.pool.ntp.org'
+	list server '1.openwrt.pool.ntp.org'
+	list server '2.openwrt.pool.ntp.org'
+	list server '3.openwrt.pool.ntp.org'
+	option enabled '1'
+	option enable_server '0'
+
+config led 'led_power'
+	option name 'POWER'
+	option sysfs 'd-link:green:power'
+	option default '1'
+	option trigger 'heartbeat'
+
+config led 'led_diag'
+	option name 'DIAG'
+	option sysfs 'd-link:red:power'
+	option default '0'
+
+config led 'led_wlan2g'
+	option name 'WLAN 2.4 GHz'
+	option sysfs 'd-link:green:wlan2g'
+	option trigger 'phy1tpt'
+

files/dap2965/etc/config/wireless

@@ -0,0 +1,54 @@
+config wifi-device  radio0
+	option type mac80211
+	option hwmode 11a
+	option path 'pci0000:00/0000:00:00.0'
+#	option channel <radio0-channel>
+#	option txpower '30'
+	option htmode VHT80
+	option distance '20'
+	list basic_rate '54000'
+	option require_mode 'n'
+	option log_level '-1'
+	option country 'BG'
+	option country_ie '1'
+	option doth '1'
+
+config wifi-iface
+	option device radio0
+	option network 'wireless'
+	option mode 'ap'
+	option ssid 'OpenFest'
+	option encryption 'none'
+#	option macaddr '<wlan0-macaddr>'
+	option isolate '1'
+	option iapp_interface 'management'
+	option wnm_sleep_mode 1
+	option proxy_arp 1
+
+config wifi-device radio1
+	option type mac80211
+	option hwmode 11g
+        option path 'platform/qca955x_wmac'
+#	option channel <radio1-channel>
+#	option txpower '20'
+	option htmode 'HT20'
+	option distance '20'
+	list basic_rate '54000'
+	option require_mode 'g'
+	option beacon_int 250
+	option log_level '-1'
+	option country 'BG'
+	option country_ie '1'
+
+config wifi-iface
+	option device radio1
+	option network 'wireless'
+	option mode 'ap'
+	option ssid 'OpenFest'
+	option encryption 'none'
+#	option macaddr '<wlan1-macaddr>'
+	option isolate '1'
+	option iapp_interface 'management'
+	option wnm_sleep_mode 1
+	option proxy_arp 1
+

files/dap2965/etc/rc.local

@@ -0,0 +1,13 @@
+# Put your custom commands here that should be executed once
+# the system init finished. By default this file does nothing.
+
+# Never uncomment this unless YOU KNOW WHAT YOU'RE DOING
+#for file in /sys/kernel/debug/ieee80211/*/ath10k/dfs_block_radar_events; do
+#    echo Y > $file
+#done
+
+/usr/sbin/ebtables -A FORWARD -i wlan+ -o wlan+ -j DROP
+/usr/sbin/ebtables -A FORWARD -i wlan+ -s 00:1e:0b:d9:bb:6a -j DROP
+/usr/sbin/ebtables -A FORWARD -i eth+ -o wlan+ -s ! 00:1e:0b:d9:bb:6a -j DROP
+
+exit 0